INDUSTRIAL AUTOMATION
Menu
SolutionsProduction LinesIndustriesProjectsVideosSupportAboutDiscuss Your Project

Automation process references

Reference processes.
Clear inputs.

Explore a selected set of clear handling, dispensing, soldering, inspection and multi-station process references. Each example helps define a possible route; final equipment is engineered around your product, process, capacity and quality requirements.

Compare your application →
How to use these references

Find the closest process, then send your part photos, drawings, material or fastener details, quality criteria and cycle requirement. A reference video illustrates a process concept; it is not a claim that the featured equipment was delivered by Yoson unless explicitly identified as a Yoson project.

DISPENSING PROCESS REFERENCE

01 / 06

Path control · Fixture positioning

Precision programmed path dispensing

A programmed motion platform follows repeatable paths over located workpieces. The application shows why part positioning, valve selection and fluid stability must be evaluated together.

Inputs to confirm

  • Part geometry and fixture datum
  • Dot, line or contour program
  • Fluid viscosity and stringing behavior
  • Shot consistency and cycle target
LIKELY SOLUTION ROUTEDesktop robot or engineered multi-axis platform
Send a similar application →
DISPENSING PROCESS REFERENCE

02 / 06

Automatic alignment · Variable placement

Vision-assisted dispensing

Camera guidance helps locate parts or features before the dispensing path runs. It is considered when manual loading or part variation makes fixed coordinates less reliable.

Inputs to confirm

  • Feature size and camera visibility
  • Part-to-part position variation
  • Required alignment method
  • Inspection or traceability scope
LIKELY SOLUTION ROUTEDesktop CCD, full-view or in-line vision system
Send a similar application →
DISPENSING PROCESS REFERENCE

03 / 06

Alternating loading · Higher utilization

Dual-station production flow

Two work areas allow an operator or handling system to load one fixture while the other is processing. The value depends on loading time, path time and safe operator access.

Inputs to confirm

  • Loading and unloading time
  • Process time per fixture
  • Fixture quantity and part orientation
  • Operator or automatic handling
LIKELY SOLUTION ROUTEDual-platform robot or custom workcell
Send a similar application →
HANDLING PROCESS REFERENCE

04 / 06

Delta robot · Repeatable transfer

High-speed pick-and-place

A delta robot coordinates fast, repeatable transfer between product locations. The handling concept depends on part presentation, gripper design, reach, orientation and the required cycle time.

Inputs to confirm

  • Part size, weight and surface
  • Infeed pattern and orientation
  • Pick and place coordinates
  • Cycle time and reject handling
LIKELY SOLUTION ROUTEDelta robot, vision-guided handling or integrated cell
Send a similar application →
VISION INSPECTION PROCESS REFERENCE

05 / 06

Feature recognition · Automated verification

Machine vision inspection

This process reference shows how cameras and lighting can be applied to locate features or verify an assembly. Inspection feasibility and accuracy must be confirmed with representative parts and acceptance criteria.

Inputs to confirm

  • Features and defects to identify
  • Part presentation and field of view
  • Accuracy and repeatability target
  • Data, traceability and reject handling
LIKELY SOLUTION ROUTEStandalone inspection station or vision-guided automation
Send a similar application →
SOLDERING PROCESS REFERENCE

06 / 06

Parallel stations · Repeatable joints

Multi-head automatic soldering

This process reference shows several programmable soldering heads working in parallel across PCB fixtures. Joint geometry, heat input, solder feeding, tooling and extraction must be confirmed for the real assembly.

Inputs to confirm

  • Joint geometry and access
  • Solder alloy, wire and flux
  • Temperature and quality criteria
  • Fixture quantity and cycle target
LIKELY SOLUTION ROUTESingle-head, multi-head or integrated soldering station
Send a similar application →

Before production

Configuration is confirmed through evidence.

01Requirement and sample review02Process trial coordination03Configuration and scope confirmation04Build and factory verification

Application review

Have a similar product or process?

Share product photos, drawings or a process video together with your target cycle time, output and quality requirements. We will help define a practical next step.

Discuss your project →
WhatsAppEmail